www.studwelderrental.com
IT1002
Download Spec Sheet

HBS 1002 Inverter

$650 / week

DRAWN ARC STUD WELDER

  • for ARC stud welding
  • for MARC welding with magnetic rotating arc according to current standards
Application
  • Especially suitable for thicker sheets of about 2 mm or higher
  • Welding of welding nuts type HexNut and MARC sleeves
  • For welding on perforated and non-perforated sheets
Process variants
  • Short cycle drawn arc welding
  • Drawn arc welding
  • MARC welding with magnetic rotating arc
Equipment
  • Welding with ceramic ferrule (series)
  • Drawn arc welding
  • Welding with shielding gas (series)

SPECIFICATIONS

Gas/Automation/Process control Series/Option/Option
Welding range Studs #4 to 5/8'', dia. 14 ga to 9/16'', (M3 to RD16, dia. 2 to 14 mm)
Sleeves and MARC welding nuts type HexNut M6 to M12
Welding material Studs: Mild steel, stainless steel, aluminum
Sleeves and MARC welding nuts type HexNut: Mild steel, stainless steel
Welding rate Stud welding: 1/2" (M12) = 25 studs/min
Nut welding 1): Welding nuts type HexNut M12 = 10 sleeves/min (AM 12 W)
1) The maximum welding rate is limited by a variety of parameters.
Welding current 1 000 A (max.)
Current adjustment range 100 to 1 000 A
Electrode 50 to 400 A (stepless)
Welding time 5 to 1 000 ms (stepless)
Primary power 480/460 V, 3 phases, 50/60 Hz, 35 AT (alternative input voltages available)
Connected load 50 kVA (400 V mains), 40 kW
Cooling type F (temperature controlled cooling fan)
IP Code IP 23
Dimension L x W x H 26 " x 11" x 13.4" (660 x 280 x 340 mm) without handle
Weight 68.343 lbs (31 kg)
Order No. 93-66-1202 (Gas)
93-66-1204 (Gas/Automation)
93-66-1206 (Gas/Automation/Process control)